Table of Contents
Advertisement
2-3-5.
Update of MAC Address
When a board that contains Wi-Fi has been replaced or when replacing a board that contains the main IC (CPU), the
IC's unique number (MAC address) must be reloaded.
Procedure of the MAC address update:
Note
Perform the below operations after all work has been done.
1.
Start the Adjust Manual in the Adjust Station and execute the "Wireless LAN Setting (MAC Address)" on the
ADJUST tab.
2.
Operate the unit to initialize of SSID/PW.
Applicable parts:
• VC-1025 BOARD, COMPLETE (SERVICE)
• WF-1004 BOARD, COMPLETE
Note
After the replacement and repair, the MAC address is changed, and thus the re-setting for connection devices is required.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach
it to the set when returning the set to customer.
2-3-6.
Notes on the Internal Memory
After the board replacement, execute the procedure below first.
• Start the Adjust Manual in the Adjust Station and execute the "Destination data write" on the ADJUST tab.
• Execute the script files below. (Refer to the flowchart in following figure.)
- [][]DdmMmcReadTestMINI_v[].vbe
- [][]DdmMmcMakePartition_v[].vbe
Method of the script file acquiring:
Start the Adjust Manual in the Adjust Station and reference the "INTERNAL MEMORY ADJUSTMENTS" on
the ADJUST tab.
Unless these script files are executed, the following symptoms may appear. Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory cannot be repaired.
• The internal memory cannot be formatted.
HDR-CX620/HDR-CX670/HDR-PJ620/HDR-PJ670
2-4
Advertisement
Table of Contents
