Memory Module (260Pin So-Dimm) - Sony PZW-4000 Service Manual

7-25. Memory Module (260pin SO-DIMM)

Preparation
Refer to "7-2. Flow Chart".
Removal
1. Open the levers of the memory socket in the direction of the arrow (1).
2. Remove the memory module in the direction of the arrow (2).
(1)
Levers
iAP-005 CPU board
3. Remove another memory module in the same way as in steps 1, 2.
Installation
Note
If the terminals of the memory module are dirty or dusty, clean them and remove the contamination completely.
1. Insert the memory module into the socket at an angle.
2. Turn the memory module to horizontal position until a clicking sound is made.
3. Assemble this unit.
Notch
Memory socket
(1)
Memory socket
Notch
SO-DIMM
(2)
148