Alarms Relating To Audio And Video Signals - Sony PZW-4000 Service Manual

2-3-7. Alarms Relating to Audio and Video Signals

Log Alarm message in
status display area
W10-021 REF NON-STD
W10-022 REF Not Exist
W10-032 No INPUT!
W10-033 SDI Sig!
W10-034 Input Phase!
W10-035 COLORSPACE!
W10-036 OETF!
W10-037 Async Input!
W10-040 EMPHASIS!
Alarm message in video monitor screen
A NON-STANDARD REF SIGNAL IS BEING
USED FOR REF VIDEO. USE A STANDARD
SIGNAL.
INPUT VIDEO IS NOT DETECTED. CHECK
THE VIDEO INPUT MODE AND SUPPLY A
VIDEO SIGNAL TO VIDEO INPUT.
SDI INPUT SIGNAL DOES NOT MATCH
SYSTEM SETUP.
CHECK MAINTENANCE MENU M2.
INPUT VIDEO SIGNALS TO THE SDI 1 to 4
CONNECTORS ARE OUT OF PHASE.
COLORSPACE ON THE INPUT SDI VPID
DOES NOT MATCH WITH CURRENT
SYSTEM SETUP.
CHECK SDI INPUT SIGNAL OR CHANGE
SYSTEM SETTINGS.
OETF ON THE INPUT SDI VPID DOES NOT
MATCH WITH CURRENT SYSTEM SETUP.
CHECK SDI INPUT SIGNAL OR CHANGE
SYSTEM SETTINGS.
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO SIGNAL.
INPUT AUDIO EMPHASIS IS NOT
SUPPORTED. CHECK THE EMPHASIS OF
THE AUDIO INPUT SIGNAL.
Description/action
Input a standard signal.
Input a reference signal.
Input an SDI signal.
A signal that does not match the number of lines
and the SDI signal type (12G/3G/1.5G, 2SI/SQD,
and Level A/B) setting of the unit was input.
Input a signal that matches the setting of the unit or
change the maintenance menu item "M2: SDI
CONFIG" setting.
There are phase differences between the signals
that are input to the SDI 1 to 4 connectors.
Input signals of the same phase.
An SDI signal unsupported by the color space
setting of the unit was input.
Input a signal that matches the setting of the unit,
or change the "748: COLOR SPACE" setting in the
setup menu.
An SDI signal unsupported by the OETF setting of
the unit was input.
Input a signal that matches the setting of the unit,
or change the "749: OETF" setting in the setup
menu.
There are phase differences between the reference
signal that are input to the REF. VIDEO INPUT
and the input video signals.
Input signals of the same phase.
Check the emphasis of the audio input signal.
30