Menu Description - HIKVISION DS-2CE12KF3T-PIRXO User Manual

1. Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Use three PM4 screws to fix the installation plate
onto the wall mount.
Figure 2-11 Fix the Installation Plate
4. Refer to Steps 3 to 5 of Section 2.2.1 to finish
installation.

3 Menu Description

Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
Steps:
1. Connect the camera with the TVI DVR and the
monitor, as shown in figure 3-1.
2. Power on the camera, TVI DVR, and monitor to view
the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
calling preset No. 95.
Figure 2-10 Fix the Wall Mount
Figure 2-12 Finish Installation
Figure 3-1 Connection
button or