Product Features; Installation - HIKVISION DS-2CE12KF3T-PIRXO User Manual

Do not aim the camera at the sun or extra bright

places.
The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnetic

radiation or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulation, good ventilation is

required for the operating environment.
Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
1 Introduction

1.1 Product Features

The main features are as follows:
High quality imaging with 3K/4K resolution

High performance CMOS sensor

OSD menu with configurable parameters

24-hour color image

Smart light

3-axis adjustment

High quality audio with audio over coaxial cable,

built-in microphone
1.2 Overview
1.2.1 Overview of Type I Camera
PIR
Lens
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Enclosure
PIR
Main Body
Speaker
Base
Figure 1-2 Overview of Type II Camera

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid damage.
Bracket
Main Body
Speaker
Lens
Video Cable
Line Out Interface
Power Cord
Video Cable
Line Out Interface
Power Cord