Keyboard Wedge Connection; Laptop Direct Connect; Rs-232 - Hand Held Products 2020/5620 System Manual

Note: After you scan one of the codes, power cycle the host terminal to have the
interface in effect.

Keyboard Wedge Connection

If you want your system programmed for an IBM PC AT and compatibles
keyboard wedge interface with a USA keyboard, scan the bar code below.
Keyboard wedge is default the interface.
Note: The following bar code also programs a carriage return (CR) suffix.

Laptop Direct Connect

For most laptops, scanning the Laptop Direct Connect bar code allows
operation of the scanner in parallel with the integral keyboard. The following
Laptop Direct Connect bar code selects terminal ID 03, programs a carriage
return (CR) suffix and turns on Emulate External Keyboard

RS-232

The RS-232 Interface bar code is used when connecting to the serial port of a
PC or terminal. The following RS-232 Interface bar code also programs a
carriage return (CR) and a line feed (LF) suffix, baud rate, and data format as
indicated below. It also changes the trigger mode to manual.
Option
Baud Rate
Data Format
IMAGETEAM™ 2020/5620 System Manual
IBM PC AT and Compatibles
with CR suffix
Laptop Direct Connect
with CR suffix
Setting
38400 bps
8 data bits, no parity bit, 1 stop bit
RS-232 Interface
(page 2-5).
1 - 15