Resetting The Standard Product Defaults; Temporary Visual Menu 2003 Configuration - Hand Held Products 2020/5620 System Manual

Resetting the Standard Product Defaults

If you aren't sure what programming options are in your scanner, or you've
changed some options and want the standard product default settings restored,
scan the Standard Product Default Settings bar code below.
The Menu Commands
settings for each of the commands (indicated by an asterisk (*) on the
programming pages).

Temporary Visual Menu 2003 Configuration

For quick download communication configuration, scan the Visual Menu 2003
bar code to temporarily configure the scanner for Visual Menu 2003 settings.
Refer to Visual Menu 2003
Menu 2003. After using Visual Menu, scan the Reset Scanner bar code on
8-1.
Note: If you have a unit capable of keyboard wedge mode, scan the bar code
below and the unit will communicate in RS-232 mode, allowing it to work
with Visual Menu 2003. To convert the scanner back to keyboard wedge
communication, cycle the power.
Note: If you download new software into a unit, the user-programmed
parameters are retained. If you need to discard user-programmed
settings, scan the Standard Product Default Settings bar code (see
Standard Product Default Settings
8 - 2
Standard Product Default Settings
starting on page 10-5
on page 9-1 for additional information about Visual
Visual Menu 2003
IMAGETEAM™ 2020/5620 System Manual
lists the standard product default
on page 8-2).
page