Upc A Number System; Upc A Addenda; Upc A Addenda Required - Hand Held Products 2020/5620 System Manual

UPC A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On

UPC A Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

UPC A Addenda Required

When Addenda Required is set to on, the scanner will only read UPC A bar
codes that have addenda. Default = Not Required.
Required
IMAGETEAM™ 2020/5620 System Manual
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
6 - 19