Reread Delay; User-Specified Reread Delay - Hand Held Products 2020/5620 System Manual

Reread Delay

This sets the time period before the scanner can read the same bar code a
second time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads at
POS (point of sale). Use shorter delays in applications where repetitive bar code
scanning is required. Default = Medium.
Reread Delay only works when in automatic trigger mode (see page 3-5).
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside
back cover, then scanning Save .
User-Specified Reread Delay
3 - 6 IMAGETEAM™ 2020/5620 System Manual