Data Accumulation Mode; Beeper And Led Sequences And Their Meaning; It5620 Led Sequences And Their Meaning; It2020 Led Sequences And Their Meaning - Hand Held Products 2020/5620 System Manual

Data Accumulation Mode

Scan the bar codes below to turn data accumulation (batch) mode on and off. If
data accumulation mode is on, bar code data is stored when the scanner is out
of range of the base and transmitted once the scanner is back in range.
Data Accumulation Mode On

Beeper and LED Sequences and Their Meaning

The IT5620 contains LEDs on the top of the unit to indicate its power up,
communication, and battery status. Simply stated, red LED = error; green
LED = success of any type. The unit's audible indicators have meaning as well:
3 beeps = error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED illumination and beeps
for the IT5620.

IT5620 LED Sequences and Their Meaning

LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking

IT2020 LED Sequences and Their Meaning

The base contains a red LED that indicates the status of the unit and verifies its
communication with the host system and a green LED that indicates scanner
battery charge condition.
IMAGETEAM™ 2020/5620 System Manual
Beeper Indication
None
1 beep
3 beeps
2 beeps
3 beeps
* Data Accumulation Mode Off
Cause
Battery low
Successful communication
or linking
Failed communication
Successful menu change
Unsuccessful menu change
1 - 9