Table of Contents
Advertisement
L A M P R E P L A C E M E N T
Caution: Always replace with the lamp with the exact same type, unless otherwise specified
by an authorized ADJ® service technician. Replacing it with anything other than the specified
part can damage your unit and will void your manufactures warranty.
Caution! Never attempt to change the lamp while the fixture is plugged in. Always disconnect
the main power and allow the unit to cool for 15 minutes before attempting to replace the
lamp. Please see page 7 for important information regarding the discharge lamp. See the next
pages for lamp replacement instructions. Be sure to follow the proper handling procedures
that deal with discharge lamps.
Lamp replacement warning display:
•
"E1" is displayed at 2700 hours. Pressing ENTER resumes normal use.
•
"E2" is displayed at 3000 hours, and the unit repositions to a neutral position (moving head
is pointed upwards) with no flashing. Pressing ENTER resumes normal use.
•
"E3" is displayed 3200 hours, but pressing ENTER gives the operator limited access to the
display with no DMX control.
13
Advertisement
Table of Contents
