Removing The Headrest Cover; Removing The Seat Cover; Removing The Cover Of The Leg Extension; Impact Shield Cover - KIDDY PHOENIXFIX3 Directions For Use Manual

Hide thumbs Also See for PHOENIXFIX3:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
EN
Then open the hook and loop fasteners on the rear side of the shoulder
supports (G) and pull the cover towards the front off the seat.

9.2 Removing the headrest cover

First put the headrest (F) into the highest position.
Then open the hook and loop fasteners on the rear side of the cover.
Now carefully remove the cover from the height adjustment handle (P) and pull
it forward over the headrest (F).

9.3 Removing the seat cover

First open the press studs on the underside and rear side of the seat (E) and on
the two straps on the back of the cover.
Now disengage the left and right hook and loop fasteners under the cover and
pull the cover up and off.

9.4 Removing the cover of the leg extension

First pull the leg extension (J) into the most forward position.
Then detach the cover from the hook on the underside of the leg extension (J).
Now carefully pull the cover over the edge of the leg extension (J) in an upwards
motion.

9.5 Impact shield cover

The impact shield cover may not be removed or washed.
!
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents