Keyboard Choices - QRPworks K-Board User Manual

K3/K3S Settings:
The K-Board - K3/K3s combination does not offer
entering text with a paddle feature at this time.

Menu: RS232: set to 38400.

Menu: CW PADL: set at tip-dot or tip-dash, and not
Hand. Plug your paddle directly into the Key jack on the
K3/K3S.

For RTTY or PSK, set the mode to TX Data. Hold Data
MD, select:
o
o
"TX Data" will be the mode shown on the screen

Text Decode: Hold TEXT DEC. Select ON by rotating
VFO-B.
Refer to the Data Modes section in the K3 manual

Keyboard Choices

The K-Board can be used with a wired or wireless USB
keyboard.
Please note that the wireless keyboard must be a 2.4 GHz
wireless keyboard, and NOT a Bluetooth keyboard.
The K-Board can use a USA or UK keyboard. Pressing Alt-K
will toggle between the two. In the K-Board, the difference is
that the @ and " characters are reversed between the two
types.
K-Board User Manual
PSK D for PSK
FSK D for RTTY.
rev 1.6 Page 8 of 37