When finished, press the F12 key again or Enter to
save the changes and return to the normal mode. The
Yellow LED will go out.
o If in CW mode, you will hear an R and if text
o If in a RTTY or PSK mode, if text decoding is on,
o If you want to cancel the editing of a macro, press the
ESC key. The K-Board will return to the normal mode.
The Yellow LED will go out
K-Board User Manual
decoding is on, you will see an R on the rig's
scrolling display.
you will see an R on the rig's display.
rev 1.6
Page 18 of 37