K-Board Prompts; Stored Text Messages And Rig Macros - QRPworks K-Board User Manual

You just type and the K-Board and the rig will take care of the
rest.

K-Board Prompts

You have the option of seeing K-Board user prompts on the
rig's scrolling display. The prompts are reminders to you that
the K-Board is waiting for a command.
For example, if you press Alt-R to reset the K-Board and text
decoding is on, then you will see "RESET? Y/N" on the rig's
display.
On the keyboard, press ALT-E to toggle between seeing the
prompts or not.

Stored Text Messages and Rig Macros

The K-Board has 20 memory locations for either text messages
or rig macros for the K3 / KX3 / KX2. Any of the 20 can be
used for either.
Each of the 20 text messages or rig macros can be 80
characters each. As a text message, they can be used for
"canned" text, such as calling CQ, "my name is...", contest
exchanges (599 CO), etc.
The first 10 messages (1-10) are stored and sent using the
function keys, F1 to F10. The second 10 messages (11-20)
are stored and sent using the function keys, Alt-F1 to Alt-F10.
K-Board User Manual rev 1.6 Page 11 of 37