QRPworks K-Board User Manual page 29

Troubleshooting Tips
1. Issues connecting with the rig
If you experience issues connecting to the rig, the
following procedure is recommended. Verify the rig
baud rate is set to 38400.
a. Turn off the rig
b. Turn off the K-Board via the on/off switch
c. Turn the rig on first.
d. Wait a few seconds
e. Turn on the K-Board
2. I'm using a USB wireless keyboard, but it does not
work.
Make sure it is a 2.4 GHz wireless keyboard and not a
Bluetooth keyboard
K-Board User Manual
.
rev 1.6 Page 29 of 37