Quick Qsy - QRPworks K-Board User Manual

@ - (at symbol) used to indicate it's a Grab & Go
. - (period as the first character) used to indicate the stored
data is a rig macro, not a text message. It's OK to use a period
elsewhere in a message.
| - (vertical bar) used at the end of a RTTY or PSK message to
immediately stop transmitting after the last character is sent.

Quick QSY™

The K-Board provides a Quick QSY feature to change
frequency and mode very quickly and easily.
To use it, press Alt-Q. Enter the frequency and an optional
character to indicate the mode to change to.
Mode
CW
USB
LSB
PSK
RTTY
AM
FM
CW REV
Data Rev
Examples:

14070 - sets freq to 14.070 MHz. Mode does not
change.

14070P - sets freq to 14.070 MHz AND mode to PSK
for PSK (31 or 63 depending on the VFO-A setting)

21080R - sets freq to 21.080 MHz AND mode to FSK-D
or Data for RTTY
K-Board User Manual
Letter to add
C
U
L
P
R
A
F
W
V
rev 1.6
™
message.
Page 25 of 37