Call Sign Entered - QRPworks K-Board User Manual

Call Sign Entered

The K-Board gives you the ability to capture another station's
call sign and have it sent out automatically in messages. You
may be familiar with this feature in most contest loggers and
PSK or RTTY programs.
To use it,

Enter the call by pressing Alt-C. Enter up to 10
characters with the keyboard. Backspace to make
changes.

To Save it, press Enter on the keyboard.

In any of the 20 K-Board messages, use the
exclamation point (!) where you want the other station's
call to appear.
Example:

Set up a message 2 (done one time) such as: ! de KF0UR

When QSO'ing, Press Alt-C and enter KB3SII.

Press F2. The K-Board will then send "KB3SII de KF0UR".

If message 2 contains ! ! de KF0UR, then "KB3SII KB3SII
de KF0UR" will be sent.

Pressing Alt-W will clear (wipe) the call entered
K-Board User Manual rev 1.6 Page 21 of 37