Summary Of Message/Macro Editing Operation; Naming Rig Macros - QRPworks K-Board User Manual

Summary of Message/Macro Editing Operation:

Mode
Normal
Normal
Edit
Message/Macro
Mode
Edit
Message/Macro
Mode
Edit
Message/Macro
Mode

Naming Rig Macros

The commands used in rig macros are cryptic, and when you
look at a list of commands in a rig macro, it may not be obvious
what the macro does. To help you remember, K-Board allows
you to name each macro. The name will then be shown in the
message preview. See
Macros
To name a macro, simply enter the name after the first
character period, followed by a colon ":". Everything to the left
K-Board User Manual
Action
Press F12
or ALT-Z Enter Edit
(added Message/Macro
version Mode
2.2.3)
Press F1
thru F10,
Enter new
or Alt-F1
Message/Macro
thru Alt-
F10
Message/Macro
Press F12
saved, then back
or Enter
to normal mode
Cancel Edit
Press Message/Macro.
ESC Back to normal
mode
Previewing Text Messages and Rig
rev 1.6
Result
Page 19 of 37
LEDs
Off
Yellow
flashes
Yellow
continues
to flashes
Off
Off