Previewing Text Messages And Rig Macros; Sending A Stored Text Message - QRPworks K-Board User Manual

Previewing Text Messages and Rig Macros

The K-Board provides a way to see the contents of message or
a rig macro before it is sent. This is handy if you forget which
message or macro is stored, where.
Hit Alt-P, then the F key for the message or macro you'd like to
see.
Example, Alt-P, then F1 will display on the rig's scrolling
display:

the name of message F1, if named

the contents of message F1, if it is not named.
Hit ESC to exit the message preview mode at any time.

Sending a Stored Text Message

To send a stored text message, just press the F or Alt-F key of
the message to be sent. The sent message will be sent to the
rig.
If you press an F key more than once, or multiple F keys in
sequence, the messages will be sent in sequence (chained).
This is useful, for instance, if you want to send a longer CQ. If
the message stored in F1 is:
CQ CQ CQ CQ CQ DE KF0UR KF0UR KF0UR
Pressing F1 twice will result in the following message:
CQ CQ CQ CQ CQ DE KF0UR KF0UR KF0UR CQ CQ
CQ CQ CQ DE KF0UR KF0UR KF0UR
K-Board User Manual rev 1.6 Page 15 of 37