Electrical Connection (Required) - Lopi 864 TRV 31K CleanFace Manual

Finalizing the Installation

Electrical Connection (required)


The electrical line to the grounded receptacle inside the fireplace must be installed by a qualified
installer and must meet all local codes.

Make sure the household breaker is shut off prior to working on any electrical lines.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1.

The electrical line must be a min. 14 gauge, and supply 240 Volts at 60 Hz (2 Amps).
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.
a
© Travis Industries
b
6/27/2019 - 1500
(for qualified installers only)
c
21
d
864 31K CF Aust