14
Fireplace Insert Installation
Insert with Positive Connection
REQUIRED IN CANADA.
Sealing the Flue to the Insert
The flue connection is vitally important. To ensure
proper draft, and to prevent smoke spillage during
re-loading, it is crucial for the flue to be sealed
with fireplace cement. If an adapter is used, both
joints to the liner and the insert should be sealed.
Use a generous amount of fireplace cement at
every connection (where the flue connects to the
insert and at every joint).
In addition, we recommend using non-combustible
fiberglass insulation to seal the fireplace enclosure.
By sealing the top and bottom of the chimney, and
the surround panels, you will be ensuring outside
air is not pulled into the chimney.
Flue Installation
© Travis Industries
(for qualified installers only)
IDB1133
INTEGRITY™ Super Stove Starter
INTEGRITY Venting Systems
manufactures starter sections in
straight or angled configurations to
suit your application. They are
secured from inside the firebox,
making installation much easier.
Contact INTEGRITY Venting
Systems for additional details:
integrityventingsystems.com
11/5/2021 - 1560
Evergreen Insert