Pre-Installation And Application Warnings - Directechs DB3 Installation Manual

Pre-installation and application warnings

Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Important! RSR installations are NOT compatible with vehicles equipped with a manual transmission.
Š
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle completely on its own.
Š
Consequently, there is no need for an aftermarket or an OEM remote starter in order to start the vehicle from a distance.
SmartStart Compatible: SmartStart is equipped with D2D, which means it can be connected to an interface module
Š
and used in Remote Start Ready (RSR) mode without the use of a remote starter. See "Module programming" for more
information.All connectors are displayed from the wire side (unless specified otherwise).
Refer to the "Vehicle connections" following the installation diagram.
Š
General notes: This section highlights important information for this specific firmware.
No notes for this installation.
5
403.CHRYSLER 7.26 2006 Jeep Commander
©2021 VOXX•DEI LLC. All rights reserved.
Keys required for 1 Keys required for
programming operation
0