Om2000+ Firmware Upgrade - OM POWER OM2000+ Manual

Shortwave power amplifier

Hide thumbs Also See for OM2000+:

Table of Contents

7.3. OM2000+ firmware upgrade

Download the firmware upgrade software and latest firmware file for the OM2000+ from the official

OM Power website http://www.om-power.com/downloads. Store it to OM2000+ folder created on

your PC.

NOTE: Use a serial null modem cable and connect to the PC port on the OM2000+ rear panel with a

COM port on the PC.

Open folder OM2000+ on your PC, find the

MX460L.exe file and run it.

Type of supported TCVR and

frequency are visible on the display.

AUTO LED is ON.

Select SETTINGS and choose the COM port

you want to use. Baud rate should be 115200.

Close the window.

Type of supported TCVR and

frequency are visible on the display.

AUTO LED is ON.

Select the Firmware tab and click on the LOAD

BIN button.

Choose OM2000+ Vxxx.bin file in the folder.

Type of supported TCVR and working

frequency are visible on the display.

working

AUTO LED is ON.

Table of Contents

Do you have a question about the OM2000+ and is the answer not in the manual?