OM POWER OM2000+ Manual page 20

Green graph may show one of the user
Type of supported TCVR and working
selectable 8 monitored parameters. Select the
frequency are visible on the display.
wanted parameter from the list at the bottom
of the screen and press SAVE
Repeat these steps to populate BARG2 and
Type of supported TCVR and working
BARG3 as desired
frequency are visible on the display.
Press EXIT to go back to the Menu display,
then press SERVICE.
Type of supported TCVR and working
frequency are visible on the display.
By pressing the SERVICE button, we are in the
Type of supported TCVR and working
SERVICE settings mode.
frequency are visible on the display.
Scroll to selected line and press SHOW or SET
(depending on the line).
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
20