thomann Millenium NonaPad User Manual page 30

Operating
5.11.5 Information about the USB flash drive (USB stick)
ö
#
$
%
30
1. Press [SETUP] and [OK] simultaneously to enter the USB menu.
ð The display shows the respective submenus.
2.
Press or to select the menu item 'INFO' .
ð The display shows the respective submenus.
3. Press [SELECT] repeatedly to switch between submenus.
1 Shows the total storage capacity of the USB flash drive.
2 Shows the remaining storage capacity of the USB flash drive.
3 Formats the USB flash drive.
Confirm the selection with [OK].
Press [SELECT] repeatedly to choose between 'No' (cancel formatting)
and 'Yes' (formatting) and confirm your selection with [OK].
4 Defrags the USB flash drive.
Confirm the selection with [OK].
Press [SELECT] repeatedly to choose between 'No' (cancel defrag) and
'Yes' (defrag) and confirm your selection with [OK].
Do not switch off the device during the defrag.
4.
After the formatting / defrag, the device restarts and the display shows
'welcome' .
ð The device is operational again.
Formatting erases all files on the USB flash drive (USB stick). Make sure there
are no files on the USB flash drive (USB stick) that you want to keep.
sampling percussion pad