Metronome - thomann Millenium NonaPad User Manual

5.9 Metronome

Setting the tempo
Further setting
ö
#
$
%
&
1.
Press [CLICK] to turn the metronome on and off.
ð The display shows the currently set tempo and the corresponding sub‐
menus.
2.
Press or to select the menu item 'TAP' .
3.
Use the rotary control or press [–/+] to change the metronome tempo between
'20 bpm' and '240 bpm' .
4. Press [OK] to confirm the new value.
ð The display shows 'Save successfully!' .
5.
Press or to select the menu item 'SETUP' .
6. Press [SELECT] repeatedly to switch between submenus.
1 Shows the metronome sound
Use the rotary control or press [–/+] to pick a metronome sound '1' to
'5' . Confirm the selection with [OK].
2 Shows the metronome beat.
Use the rotary control or press [–/+] to pick a metronome beat '1' to '16' .
Confirm the selection with [OK].
3 Shows the metronome rhythm.
Use the rotary control or press [–/+] to pick a metronome rhythm '1' to
'7' . Confirm the selection with [OK].
4 Shows the metronome's panorama position.
Use the rotary control or press [–/+] to adjust the position of the metro‐
nome sound within the stereo panorama between '0' and '127' ( '0' :
dead left, '64' : centre, '127' : dead right). Confirm the selection with [OK].
5 Shows the metronome volume.
Use the rotary control or press [–/+] to set the metronome volume
between '0' and '127' . Confirm the selection with [OK].
ð The display shows 'Save successfully!' .
NonaPad
Operating
21