thomann Millenium NonaPad User Manual page 29

5.11.4 Exporting data
ö
#
$
%
1. Press [SETUP] and [OK] simultaneously to enter the USB menu.
ð The display shows the respective submenus.
2.
Press or to select the menu item 'SAVE' .
ð The display shows the respective submenus.
3. Press [SELECT] repeatedly to switch between submenus.
1 Indicates that a USB flash drive is connected.
2 Exports the user-defined samples, drum kits, and MIDI files
Confirm the selection with [OK].
Press [SELECT] repeatedly to choose between 'No' (cancel export) and
'Yes' (export) and confirm your selection with [OK]. The display shows
'export ...' .
3 Exports the user-defined settings for the pads.
Confirm the selection with [OK].
Press [SELECT] repeatedly to choose between 'No' (cancel export) and
'Yes' (export) and confirm your selection with [OK]. The display shows
'export ...' .
4 Exports all user-defined samples, drum kits and MIDI files on the Percus‐
sion Pad, as well as the user-defined settings for the pads.
Confirm the selection with [OK].
Press [SELECT] repeatedly to choose between 'No' (cancel export) and
'Yes' (export) and confirm your selection with [OK]. The display shows
'export ...' .
4.
After the export, the device restarts and the display shows 'welcome' .
ð The device is operational again.
Preset sounds and drum kits cannot be exported.
NonaPad
Operating
29