Using A Usb Flash Drive (Usb Stick) - thomann Millenium NonaPad User Manual

Operating
5.10.4 Display settings
ö
#
5.11

Using a USB Flash drive (USB stick)

26
1. Press [SETUP] to enter the settings menu.
ð The display shows the respective submenus.
2.
Press or to select the menu item 'DISP' .
3.
Press [SELECT] repeatedly to switch between submenus.
1 Shows the display's contrast.
Use the rotary control or press [–/+] to set the display contrast between
'0' and '20' . Confirm the selection with [OK].
2 Shows the behaviour of the LEDs below the pads.
Use the rotary control or press [–/+] to set the LEDs' behaviour.
'off' : The LEDs below the pads do not light up when the pads are played.
Confirm the selection with [OK].
'type1' : The LEDs below the pads light up for 0.5 seconds when the pads
are played. Confirm the selection with [OK].
'type2' : The LEDs below the pads light up immediately when the pads
are played. Confirm the selection with [OK].
ð The display shows 'Save successfully!' .
The Percussion Pad detects USB flash drives (USB stick) that are in the exFAT, FAT32
or FAT format and are not partitioned. We recommend formatting the USB flash drive
(USB stick) before using it with the percussion pad.
sampling percussion pad