Yale ERC40VH Manual page 85

SET TIME AND DATE MENU
A Supervisor or a Service Technician can use this menu to set the system time and date format on the on-
board clock. Figure 42
Procedure for Setting Time and Date
To exit from a menu at any time without making any changes, press the Scroll Back Key or
NOTE:
Scroll Forward Key.
1.
At the Display Menu, scroll to the Set Time and Date Format submenu, unless already there, and press
the Enter Key (*) to enter this submenu.
1.
Press the 2 or 3 soft key to select the time icon, then press the Enter Key.
The system will display a flashing line under the hour portion of the time. To change the hour:
a.
Use the number keys to enter the correct hour and press the Enter Key. If the hour does not need to be
changed, just press the Enter Key.
If the number you entered is a valid hour setting, the system accepts it and moves the flashing line to
shows the title screen for this menu.
Figure 42. Set Date and Time Menu
Last
↑
SCROLL
↓
Daylight
Save
Press
End
Enter Key
Day first
Last Su Enter Key
↑
SCROLL
↓
Daylight
Save
End
Last Sa
Daylight Select the Day of the
Save Week from available
End selections and press
first Su Enter Key
↑
SCROLL
↓
Daylight
Save
End
first Sa