Yale ERC40VH Manual page 63

add, remove, or change passwords whose level is equal to or lower than their own password level. This means
a Service Technician can modify the passwords assigned to Operators, Supervisors, and other Service
Technicians, while a Supervisor can modify passwords assigned to Operators or other Supervisors. Up to 250
passwords can be assigned for use.
—
Scroll Keys
—▸
Truck Setup
Top-level
menu
↑ Truck Setup
Up Add/Remove
Arrow/Down Password
Arrow Soft Submenu
Key
↓
Figure 18 shows the Change/Remove password screen. The Up Arrow/Down Arrow soft keys (i.e., 2 and 3)
cycle between the privilege level(s) associated with this password. You can use the Hare soft key (#) to cycle
through the available performance modes for this password. Press the Trash Can soft key (4) to remove this
password from the current passwords.
Table 14 shows the process for adding a new password.
Table 14.
Press Enter
Key (*)
The initial Enter new
password
Password
screen will using keys 0
through 9
display
Add Password
Press Enter Key (*)
First
Press the Up Arrow or
Down Arrow Soft Key to
select password access
level
Then
Press "Hare" (4) soft key
to cycle through
performance modes
Operator, Supervisor, or
Service Technician
password access level
Available performance
modes are minimum (1)
to maximum (4, the
default)
Press the
Enter Key) to
add this
password