Scroll Forward Key (—▸) until the Truck Setup Title Screen is displayed, as shown in
Press the Enter Key (*) to enter the Truck Setup Menu. The system will display the Add/Remove Password
submenu shown in
Figure
the Scroll Back Key or Scroll Forward Key to move to the desired submenu and press the Enter Key.
The Truck Setup Menu presents these submenus to Supervisors:
Add/Remove Password
•
Restore Default Settings
•
Motion Alarm
•
Impact Monitor Settings
•
Auto Power-Off Time Delay
•
Return to Set Tilt
•
Traction Speed Limit
•
Scheduled Maintenance Reminder
•
Minimum Pump Standby Flow Rate
•
Operator Checklist
•
Figure 49. Truck Setup Title Screen
50. Press the Enter Key again to enter this submenu. For a different submenu, use
Figure 50. Add/Remove Password Submenu
Figure
49.