Yale ERC40VH Manual page 92

Impact Monitor Shutdown
•
Motor Braking
•
The following sections describe the Truck Setup submenus.
ADD/REMOVE PASSWORD
This menu selection is available to logged in Supervisors and Service Technicians.
NOTE:
This submenu, shown in
See the Password Screen
BATTERY SETTINGS
This submenu is available to logged in Service Technicians and Supervisors. It is visible only
NOTE:
on trucks equipped with the Lithium-Ion Ready option.
This menu provides settings for battery type installed on the truck.
There are two possible battery settings, lead-acid and lithium-ion battery. See
1. LEAD-ACID BATTERY SETTING
2. LITHIUM-ION BATTERY SETTING
It is important that the setting match the battery type installed to allow for accurate function of the battery
discharge indicator and Shutdown Warning System.
RESTORE DEFAULT SETTINGS
This submenu is available on all trucks to logged in Supervisors and Service Technicians.
NOTE:
This menu allows a Supervisor or a Service Technician to change all adjustable truck settings back to their
factory default settings. Calibrations are NOT reset when this function is used.
Defaults screen.
Figure 50, allows Supervisors and Service Technicians to add or remove passwords.
topic in the Password Screen section for more information.
Figure 51. Battery Settings
Figure 51.
Figure 52 shows the Restore