Yale ERC40VH Manual page 59

• The Pump Hour Meter shows the total time the hydraulic pump has been running.
The Traction Hour Meter shows the total time on traction motor while the truck has been moving.
•
The Secure Hour Meter shows the total time the operator has been in the seat with the key or keyless
•
switch in the ON position and cannot be reset.
The time shown on the meters is displayed in hours, but the system stores the values to the nearest 0.1
•
hour.
Icon
Truck Hour Meter Icon
Traction Hour Meter Icon
Hydrualic Pump Motor Hour Meter Icon
Secure Hour Meter Indicator Icon
These meters can be examined more closely or reset by a Service Technician using the procedures described
in the Status Menu section.
ALERT SCREENS
There are two types of alert screens, Fault Screens (failure indication screens) and Interlock Notification
Screens. Both types of alert screens are temporary in nature because the system immediately restores the
original screen after a key press or other action removes the problem.
When the system detects an active failure, the display changes to a Fault Screen which flashes a fault code, the
wrench icon, and other icons to indicate the problem, similar to the example shown in
displayed, the alert screen flashes to draw the user's attention. Pressing either the Scroll Back Key ( —) or
Scroll Forward Key (—▸) after the alert screen appears causes the system to return to the last screen
displayed.
Description
Figure 14. As it is