Connection Of Host Machine - Fujitsu MB2147-01 Application Note

2.6

Connection of Host Machine

Connect a host machine to the emulator through an RS-232C cable, USB cable, or LAN
cable as shown in Figure 2.6-1 "Connection of Host Machine".
To connect a plug-and-play device through a USB cable to the host machine, first turn
on the power to all devices, and then connect the USB cable to the host machine.
I Connection of Host Machine
CAUTION
Prohibition
Note:
To connect a host machine to the emulator, each of an RS-232C cable, USB cable or LAN
cable must be connected. If the plural cables are connected simultaneously, it may cause
malfunctions.
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables.
Doing so may result in device problems or electric shock.
Grasp connectors when connecting or disconnecting a cable. Do not
grasp the cable. Doing so may result in device problems or electric
shock.
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables
(unless such an operation uses USB cables for plug-and-play devices).
Doing so may result in device problems or electric shock.
Figure 2.6-1 Connection of Host Machine
USB cable
RS-232C cable
2.6 Connection of Host Machine
LAN cable
31