General Specifications - Fujitsu MB2147-01 Application Note

1.3

General Specifications

Table 1.3-1 "General Specifications of Emulator" lists the general specifications of the
emulator.
I General Specifications of Emulator
CAUTION
Caution
Table 1.3-1 General Specifications of Emulator
Item
Name
Model number
Power
Operating frequency
Operating temperature
Operating humidity
External dimensions
Weight
*1 Use this only if the evaluation MCU has a DSU-dedicated power input terminal.
Do not use this terminal for any other purpose.
The emulator supplies power through a DSU-FR cable or adapter board to the evaluation MCU.
*2 The user system power must be supplied from the user system through a DSU-FR cable or adapter board.
*3 Note that this is the operating frequency of the emulator interface bus and not that of the MCU. The
minimum operating frequency depends on the debugger software.
Use the product according to its specifications. Doing so may result in
device problems.
DSU-FR emulator
MB2198-01
Emulator power input
DSU-dedicated power output(*1)
User system power input(*2)
Maximum of 33 MHz(*3)
5 to 35
20% to 80% (No condensation)
148 (W) x 210 (D) x 44 (H) mm (not including protrusions and rubber pads)
700 g
1.3 General Specifications
Specification
+16 V / 2.5 A (supplied from the dedicated
AC adapter)
+3.3 V (V T) / 350 mA (with fuse)
CC
0 V to +5.5 V (UV ) / 100 mA or less
CC
5