Table of Contents
Advertisement
Table B-4 Emulator Interface Wiring Specifications
Signal line
name
ICLK
•
The total wiring length of each signal line (from the evaluation MCU pin
ICS[2:0]
to the Emulator interface connector pin) must be 50 mm or less.
ICD[3:0]
•
The total wiring lengths of every signal line may differ by 2 cm at the
BREAK
most. The total wiring length of ICLK must be the shortest.
UV
•
Prepare wiring in a pattern with more capacity than the rated current.
CC
V
T
•
An erroneous connection of a probe may cause a short-circuit between
CC
a power source and ground or be a reverse connection. As a safety
measure, include a protective circuit such as a fuse in each of the
power circuit patterns.
GND
•
Connect terminals directly to power circuit patterns, such as the ground
plane.
APPENDIX B User System Specifications
Wiring specification
53
Advertisement
Chapters
Table of Contents
