Connection Of Each Product - Fujitsu F2MC-8FX Setup Manual

4.2 Connection of each product

This section describes how to connect the MCU Board, the Evaluation Board, and the BGM Adapter.
This section also describes how to mount the crystal oscillator on the MCU Board, and how to plug
the AC adapter into the Evaluation Board.
Connecting MCU Board and Evaluation Board
Connect the MCU Board and the Evaluation Board, referring to "Figure 3 Connection of MCU
Board and Evaluation Board". Each board has an index to avoid the reverse mounting. Look at the
index position to connect the boards.
Index
(Backside mounting)
MCU Board
Figure 3 Connection of MCU Board and Evaluation Board
Evaluation Board
JP1
JP2
120
2
1
119
120
2
1
119
(Backside mounting)
Index
5