Fujitsu MB2147-01 Application Note page 49

2.3 Connection of User System
Figure 2.3-1 Connection of User System (DSU-3)
User system connector
Movable part
Emulator interface connector
ser system
To connect the DSU-FR cable, pull out the movable part (white part) below the emulator interface
connector on the user system, insert the user system connector, and then push the movable
part back in place.
To remove the DSU-FR cable, pull out the movable part (white part) below the emulator interface
connector on the user system, remove the user system connector, and then push the movable
part back in place.
27