Power-Off Sequence - Fujitsu MB2147-01 Application Note

3.3

Power-off Sequence

Power off the user system, emulator, and host machine in this sequence.
I Power-off Sequence
CAUTION
Prohibition
Power off the units following the sequence shown in Figure 3.3-1 "Power-off Sequence".
To power off the emulator, push the power switch located on the back of the emulator (see
Figure 1.2-3 "Emulator Appearance (rear view)") and release it. The switch then returns to the
OFF position (protruding).
Follow the procedure described in the manual to turn off the product.
Doing so may result in device problems.
Figure 3.3-1 Power-off Sequence
Quit "Emulator Debugger."
Turn off the user system.
Turn off the emulator.
Turn off the host machine (if necessary).
3.3 Power-off Sequence
41