Emerson Rosemount Oxymitter DR Reference Manual page 27

Reference Manual
00809-0100-4884
2.1.2 Install probe
You may install the Rosemount
Prerequisites
Ensure all components are available to install the transmitter. If equipped with a ceramic
diffuser, make sure the diffuser is not damaged.
Note
Emerson recommends an abrasive shield for high velocity particulates in the flue stream
(such as those in coal-fired boilers, kilns, and recovery boilers). Emerson provides vertical
and horizontal brace clamps for 9 ft. and 12 ft. (2.75 m and 3.66 m) probes to provide
mechanical support for the transmitter. Refer to
Rosemount Oxymitter DR
™
Oxymitter DR intact, as you have received it.
Figure 2-8.
Install
April 2022
27