Advertisement
SETUP INSTRUCTIONS
The Saddle Tramp Digital Signal Processor (DSP) uses the AX-DSP-XL app to setup, program, and
control the setup of your DSP.
SETUP INSTRUCTIONS: The General Information tab for installing the interface.
MOBILE APP
BLUETOOTH CONNECTION
SCAN: Press this button to start the Bluetooth pairing process, then select the interface once it is
found. "Connected" will appear in the top left corner of the app once it is paired.
Note: The interface must be powered during this process.
DISCONNECT: Disconnects the interface from the app.
REV. 10/15/21 INSTBC-DSPX-HD2
9
Advertisement
