Metra Electronics Saddle Tramp BC-DSPX-HD2 Installation Instructions Manual page 19

General
• Operating Voltage 10-16-volts
• DC Standby Current Draw 7mA
• Operation Current Draw 150mA
• Adjustments/Controls Application via Bluetooth
• Remote Output 12-volts DC (signal sense or with ignition)
Performance
• Equalizer Type 15 Band Graphic EQ, +/- 10dB
• THD <0.03%
• Frequency Response 20Hz - 20kHz
• Crossover Frequency 3-Way Low pass, Bandpass, High pass
• Crossover Type Linkwitz-Riley
• Crossover Slopes 12, 24, 36, 48
• Sampling 48kHz
• S/N Ratio 105dB @ 5-volts RMS
SPECIFICATIONS
Inputs
• Input Impedance
• Input Channels
• Input Options
• Input Type
• Input Voltage
Outputs
• Output Channels
• Output Voltage
• Output Impedance
1M Ohm
4
High-level or Low-level selectable through Bluetooth app
Differential-Balanced
High Level Range 0 - 28-volts (peak-to-peak)
Low Level Range 0 - 4.9-volts (peak-to-peak)
6
Up to 5-volts RMS
50 Ohms
REV. 10/15/21 INSTBC-DSPX-HD2
19