Advertisement
1. Unplug the OE radio connector and
install the BC-9715 t-harness.
BC-9715 HARNESS INSTALLATION
2. The installation of the pre-wired harness is designed to work with multiple styles of aftermarket amplifiers with different
types of inputs and outputs. Both input (white connectors) and output (black connectors) wires on the BC-9715 harness use
Molex terminals that are pre-crimped onto the speaker leads; loose Molex connectors are included to allow the user to pin the
connectors accordingly.
If the amplifier uses Molex Micro Fit connectors for the inputs and outputs, simply match the amplifier's speaker configuration
and plug them in using the provided connectors.
If the amp uses RCA inputs, pre-terminated Molex connectors with RCAs already wired are provided. The option to hardwire the
speaker inputs and outputs would be the final option.
3. To get battery power and ground wires up the backbone of the motorcycle use Saddle Tramp's BC-9703 harness. (Sold
separately)
TIP: If you have pinned the Molex Micro Fit connector improperly, you will need to use a Pin Extraction tool. (See page 22 for
Troubleshooting tips)
BC-9715 t-Harness
BC-9715 t-Harness
OE Connector removed from radio
OE Connector removed from radio
REV. 10/15/21 INSTBC-DSPX-HD2
7
Advertisement
