Table of Contents
Advertisement
10
13
18
9. Present date/time display field
The date and time is set when the incubator is
shipped from the factory. Refer to page 45 for
details.
10. Over heat display
High-limit temperature alarm is activated:
"Over Heat" is displayed alternately in normal
characters and reverse video.
11. UV lamp condition display
UV lamp ON: "UV : On" is displayed.
UV lamp OFF: "UV : Off" is displayed.
Note: Displayed only when optional UV system
set
MCO-170UVS
is
MCO-230AICL.
12. Outer door (opening/closing) display
Open: "Door : Open" is displayed alternately in
normal characters and reverse video.
Closed: "Door : Closed" is displayed.
Locked: "Door : Locked" is displayed.
13. Message display field
Alarms, errors, or messages are displayed
when a fault occurs. Refer to pages 64–66.
17
installed
to
the
11
16
Note: When there are several errors, the display
shows the message number. For example, if
there are two errors, the display shows "1/2".
14. Message select key
When there are several alarms/errors, the
message on the screen can be changed.
15. Menu key
Press this key to access the Menu screen. Refer
to page 29.
16. H
O
key
2
2
This key initiates H
O
2
to pages 50–54. This key is displayed if the
incubator is equipped for H
17. Unlock key
Press this key to unlock the outer door when it is
auto-locked by the electric lock. Refer to page
57. This key is displayed when an optional
electric lock MCO-170EL is installed and the
auto-lock function is ON.
18. Buzzer key
Press this key to silence the buzzer. Refer to
pages 36 and 64–66.
9
15
decontamination. Refer
2
O
decontamination.
2
2
12
14
15
Advertisement
Table of Contents
