Table of Contents
Advertisement
9.6
The Maintenance menu
9.6.1
Lamp History
This screen displays the operating hours for each of the following
bulbs: Main 1, Main 2, and OttoFlex™ Light.
Whenever you replace a bulb, reset the bulb's hour meter to 0
X
by double-clicking the "Reset" button.
9.6.2
Check Switches
On this screen, you can test the footswitches and handles you are
using.
In the top right selection field, select the connection you are
X
using.
You can scroll forwards or backwards in the list by clicking the
X
arrowheads.
In the bottom right selection field, select the footswitch you
X
want to check.
You can scroll forwards or backwards in the list by clicking the
arrowheads.
Now press all of the keys, one after the other, of the footswitch
X
you want to test.
If the key you have pressed is functioning properly, a green dot
appears on it on the display. The comment "tested" appears in the
caption field of the key.
9.6.3
Enter the accessories you are using into this screen. This will ensure
that the correct magnification appears in the "Main" menu.
In the top selection field, enter the tube currently being used by
X
the surgeon.
You can scroll forwards or backwards in the list by clicking the
arrowheads.
In the middle selection field, select the magnification of the
X
eyepieces being used by the surgeon.
You can scroll forwards or backwards in the list by clicking the
arrowheads.
In the bottom selection field, select the objective you are using.
X
You can scroll forwards or backwards in the list by clicking the
arrowheads.
If you do not make a selection, the magnification will be
calculated for the standard configuration: UltraLow™ III,
eyepiece with magnification 8.33 and objective with
WD=200 mm.
If you activate the "Standard Values" button, the standard
magnification is displayed, regardless of the accessories
used. The magnification range is between 7x and 42x.
M844 / Ref. 10 713 294 / Version 01
Microscope Settings
Touch panel
55
Advertisement
Table of Contents
