Clearing Performance Statistics - Paradyne FrameSaver 9120 User Manual

Displaying System Information

Clearing Performance Statistics

4-30
You can clear all performance statistics, or clear all statistics for a selected
interface using the Clear Statistics menu.
NOTES:
— You can also use the ClrStats function at the bottom of Performance
Statistics screens to clear only the statistics shown on that screen.
— Telco statistics cannot be cleared.
— T1 Telco statistics cannot be cleared.
Procedure
To clear performance statistics from the Clear Statistics menu:
1. Use the following menu sequence:
Main Menu Status
2. Select All or the interface ( Network, Port-1, Port-2, or BRI ) for which you
want performance statistics cleared.
If All is selected from the Clear Statistics menu, the selected interface's
statistics are cleared and Command Complete appears at the bottom of the
screen; no additional Clear [ Network, Port-1, Port-2, or BRI ] Statistics menu
appears.
3. If All is not selected, the selected interface's [ Network, Port-1, Port-2, or BRI ]
Clear Statistics menu appears. Select All, or the statistics associated with a
selected interface:
For interface . . . Select . . .
Network, Port-1, All
1
Port-2, or BRI
Physical
Frame Relay Link Only frame relay link statistics for the
Frame Relay
Error
Frame Relay LMI
DLCI: nnnn
1
BRI only appears when an ISDN BRI DBM is installed.
When Clear completes, Command Complete appears at the bottom of the
screen. If clearing a DLCI's statistics, Command Complete does not appear.
Performance Statistics
To clear . . .
T1 network's, port's, or ISDN BRI DBM's
statistics.
Only statistics associated with the physical
interface: network (NET), port (Port 1 or
Port 2), or ISDN BRI DBM (DBM).
selected interface.
Only frame relay error statistics for the
selected interface.
Only frame relay LMI statistics for the
selected interface.
Statistics for the DLCI entered.
May 1998
Clear Statistics
9121-A2-GB20-20