Clearing Ds0 Channel Allocation - Paradyne 3166 User Manual

SDCP Operation

Clearing DS0 Channel Allocation

"
3-34
4. Line 1 displays the 24 channels for the network interface. Line 2 displays
what is allocated to the DS0 channel shown in Line 1. Pressing the
key scrolls the channels onto the screen in groups of three. Select the
channel by pressing the Function key under the desired number. Port n
appears. The port is assigned to that channel. To deallocate a port, press the
Function key under that port number. Pressing the Function key under
channels assigned to other ports has no effect.
N1
Next Prt1
F1
You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface or the synchronous data ports.
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Chan.
Edit:NET
NET Chan
F1
6. From the Channel Config screen, select Clear.
Channel Config:
Dsply Clear
F1
March 1999
N2
Prt1
F3
F2
key until the Chan selection appears on
Gen
F3
F2
Prt1
F3
F2
or
3166-A2-GB20-20