Paradyne FrameSaver 9120 User Manual page 25

Hide thumbs Also See for FrameSaver 9120:
Table of Contents

Advertisement

9121-A2-GB20-20
Procedure
Upon beginning a session, the Idle screen is displayed. To activate:
1. Press Return.
2. One of the following occurs:
If . . .
Security is disabled
Security is enabled
Attempting to access the
unit through Telnet and the
user interface is currently
in session
Attempting direct access
through the COM port and
the user interface is
currently in session
Communication Port and
Login Required
configuration options are
enabled and there is no
contention for the user
interface
Then . . .
The Main Menu screen
appears.
You are prompted for a
login ID and password
Logging In
(see
on
page 3-1).
The message Connection
refused: appears.
(FrameSaver access unit
allows only one
connection at a time.)
The message User
Interface Already In Use
appears with the active
user's IP address.
The Login screen
appears.
May 1998
Startup
What to do now?
Begin your session.
Enter your ID and
password. If Invalid
Password appears, see
Device Error Messages
in
Chapter 5, Maintenance
and Troubleshooting .
See
Device Status
Messages
in Chapter 5,
Maintenance and
Troubleshooting .
See
Device Status
Messages
in Chapter 5,
Maintenance and
Troubleshooting .
Enter your ID and
password. If Invalid
Password appears, see
Device Error Messages
in
Chapter 5, Maintenance
and Troubleshooting .
3-3

Advertisement

Table of Contents
loading

Table of Contents