Paradyne FrameSaver 9120 User Manual page 40

Displaying System Information
4-14
Message What It Indicates
Network LLB Test A Network Line Loopback
Active (LLB) test is active.
Network PLB Test A Network Payload
Active Loopback (PLB) test is
active.
Network RLB Test A Network Repeater
Active Loopback (RLB) test is
active.
Network RemLB Test A Network Remote
Active Loopback (RemLB) test is
active.
PVC Loopback, A PVC Loopback is running
1
DLCI nnnn , on the selected DLCI.
3
interface
1
nnnn indicates a DCLI number of 16 through 1007.
3
interface is Network, DSX-1, Port-1, Port-2, or the basic rate interface B-channel.
May 1998
What To Do
Allow the loopback to continue
or abort the test.
Press Return ( ) while the
loopback is selected (via the
Command column) on the
Network Physical Tests screen
( Path: main/test/network _ phy)
to activate or deactivate the
test.
Allow the loopback to continue
or abort the test.
Press Return ( ) while the
loopback is selected (via the
Command column) on the
Network Physical Tests screen
( Path: main/test/network _ phy)
to activate or deactivate the
test.
Allow the loopback to continue
or abort the test.
Press Return ( ) while the
loopback is selected (via the
Command column) on the
Network Physical Tests screen
( Path: main/test/network _ phy)
to activate or deactivate the
test.
Allow the loopback to
continue.
Allow the loopback to
continue.
Press Return ( ) while the
loopback is selected (via the
Command column) on the
interface's Physical Tests
screen ( Path: main/test/
[network/port-1/port-2/BRI]
_ pvc ) to activate or deactivate
the test.
9121-A2-GB20-20